随手画一个桃心图案G90G54G0X0.Y16.406S1200M03G43H1Z50.Z0.G1Z-1F100G1X0.368Y17.067F300X0.755Y17.702X1.161Y18.309X1.586Y18.8X2.058Y19.475X2.55Y20...

程序如下(T2||H2)N100G21N102G0G17G40G49G80G90N104T2M6N106G0G90G54X0.Y0.S1000M3N108G43H2Z25.N110X10.277Y18.559N112Z10.N114G1Z-.2F500.N11...

这是一副一箭穿心的图案！！！G40G80G91G30Z0G30XY0N0020G55G90X42.87Y-1.N35S3000M03N40G0G43Z12.H1N50G1Z12.1200.N55G3X42.18Y.47I-90.578J-41.627N60G1X42....

数控铣床编程图及代码如下：1、准备功能G代码用来规定刀具和工件的相对运动轨迹、机床坐标系、坐标平面、刀具补偿、坐标偏置等多种加工操作。G00快速点定位、G01直线插补、G02顺时针圆弧插补、G03逆时针圆弧插补、G04暂停...

使用UG画出苹果logo即可，然后自动生成程序即可！完全自动，无须手动编程！

G91G28ZO.;T01M06;M08;M03S1300;G41G54G90G00X-60Y0.D01;G43Z50.H01;G01Z-5.F60;X-40.75;G02X0.Y16.88R23.87F60;X40.75Y0.;;1=49.72;2=40.75;3=0;N1IF[#3...

椭圆加工（编程思路:段直线代替曲线）例1整椭圆轨迹线加工（假定加工深度2mm):已知椭圆参数X=acosθY=bsinθ变量数表达式设定θ=#1（0°～360°）X=#2=acos［#1］Y=#3=bsin［#1］程序O0001;G90...

(铣平面程序)O2G91G01X7.G90Y-50.G91X24.G90Y50.M99（铣外圆程序）O03G91Z-11.02G90G01X0.Y60.F380.G02I0.J-60.G41G01X-10.Y55.D01G03X0.Y40.R12.G02I0.J-40...

Y100X100Y-100X-110Z5G0Z50G40X0Y0X0Y-110Z5G1Z-25G41Y-100D1Y0G2I100J0G1Y110Z5G0Z50G40X0Y0X-110Y86.603Z5G1Z-10G41X-100D1X50X100Y0X50Y-86.603X-50X-100Y0X-42.265Y100Z5...

用自动编程软件去编程，如：CAXA、Mastercam、UG都可以的。