vb如何设置网卡的混杂模式
发布网友
发布时间:2022-04-21 22:54
我来回答
共3个回答
热心网友
时间:2023-07-25 11:27
有时候为嗅探到网络上的数据,需要将网卡设置到混杂模式。进入该模式将网络上的数据一并抓获,为此在设置nic的混杂模式的时候有诸多方法:
一、通过shell命令来实现:
ifconfig eth1 promisc 设置混杂模式
ifconfig eth1 -promisc 取消混杂模式
执行结果如下
[root@localhost tftpboot]# ifconfig
eth6 Link encap:Ethernet HWaddr 08:00:27:70:1D:79
inet6 addr: fe80::a00:27ff:fe70:1d79/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:100124 errors:0 dropped:0 overruns:0 frame:0
TX packets:8795 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12986638 (12.3 MiB) TX bytes:6452270 (6.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1303 errors:0 dropped:0 overruns:0 frame:0
TX packets:1303 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:303973 (296.8 KiB) TX bytes:303973 (296.8 KiB)
[root@localhost tftpboot]# ifconfig eth6 promisc
[root@localhost tftpboot]# ifconfig
eth6 Link encap:Ethernet HWaddr 08:00:27:70:1D:79
inet6 addr: fe80::a00:27ff:fe70:1d79/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:100154 errors:0 dropped:0 overruns:0 frame:0
TX packets:8795 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13007885 (12.4 MiB) TX bytes:6452270 (6.1 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1303 errors:0 dropped:0 overruns:0 frame:0
TX packets:1303 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:303973 (296.8 KiB) TX bytes:303973 (296.8 KiB)
[root@localhost tftpboot]#
二、通过C语言方式编程来实现
#include <stdio.h>
#include <unistd.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <errno.h>
#include <linux/if_ether.h>
#include <net/if.h>
#include <sys/ioctl.h>
#include <string.h>
#define ETH_NAME "eth1"
int do_promisc(void) {
int f, s;
struct ifreq ifr;
if ( (f=socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)))<0){
return -1;
}
strcpy(ifr.ifr_name, ETH_NAME);
if ((s = ioctl(f, SIOCGIFFLAGS, &ifr))<0){
close(f);
return-1;
}
if(ifr.ifr_flags & IFF_RUNNING){
printf("eth link up\n");
}else{
printf("eth link down\n");
}
ifr.ifr_flags |= IFF_PROMISC;
if ((s = ioctl(f, SIOCSIFFLAGS, &ifr)) < 0){
return -1;
}
printf("Setting interface ::: %s ::: to promisc\n\n", ifr.ifr_name);
return 0;
}
int check_nic(void)
{
struct ifreq ifr;
int skfd = socket(AF_INET, SOCK_DGRAM, 0);
strcpy(ifr.ifr_name, ETH_NAME);
if (ioctl(skfd, SIOCGIFFLAGS, &ifr) < 0)
{
close(skfd);
return -1;
}
if(ifr.ifr_flags & IFF_RUNNING){
printf("link up\n");
close(skfd);
return 0; // 网卡已插上网线
}else {
printf("link down\n");
close(skfd);
return -1;
}
}
int main(void) {
do_promisc();
return 0;
}
热心网友
时间:2023-07-25 11:27
建议你直接去网上下载一个sniffer,网络嗅探器,他可以帮你把网卡设置成混杂模式
热心网友
时间:2023-07-25 11:28
随便装个让网卡边混杂模式的软件不就行了么,